Canon LEGRIA HF G60 Instruction Manual page 99

7
Working with Clips on a Computer
Make sure to save clips recorded with this camcorder to a computer. To do so, you will need a card reader
connected to a computer or a computer with an SD card slot. For details on transferring files from the SD card,
refer to the computer's instruction manual or OS's help modules.
Under certain circumstances, clips may be split and recorded as separate files. Using MP4 Join Tool you can join
the split files of and save them as a single seamless clip.
Transferring Files to a Computer
1 Insert an SD card with the desired clips into the SD card slot of the computer or card reader connected to the
computer.
2 Follow the OS's onscreen instructions.
3 Copy the clips on the SD card to the computer.
• Recordings on the SD card are located in folders named "XXX_mmdd" under the "DCIM" folder, where XXX
is the folder number (100 to 999) and mmdd stands for the recording date (A 104).
Joining Clips Split by the Camcorder
Use MP4 Join Tool to join clips split by the camcorder in the following cases.
• When the camcorder switches to the other SD card while recording video due to the relay recording function
(A 33).
• The video (stream) file in the clip will be split approximately every 4 GB.
MP4 Join Tool is available as a free download (for Windows or macOS) from your local Canon website. Check
the download page for the system requirements and latest information.
You will find detailed instructions about installing and uninstalling the software in the "Read This First" file (Install-
MP4 Join Tool.pdf) included in the compressed file you download. For details about using the software, refer to
the instruction manual (PDF file) that is installed with the software.
Saving Clips
99