Canon LEGRIA HF G60 Instruction Manual page 79

Using the Optional RC-V100 Remote Controller
You can connect the optional RC-V100 Remote Controller to the camcorder's REMOTE terminal in order to
control the camcorder (including advanced recording functions) from a distance. The remote controller lets you
turn the camcorder on, navigate the menus and remotely control the aperture and shutter speed, and more.
Use the cable supplied with the remote controller to connect it to the camcorder. For details on how to connect
and use the remote controller, refer to its instruction manual.
Operating modes:
1 Turn off the camcorder and connect the optional RC-V100 Remote Controller to the camcorder.
2 Turn on the camcorder in
> [B " System Setup] > [REMOTE Terminal]
3 Select [ RC-V100 (REMOTE A)] and then select [X].
Options
[ RC-V100 (REMOTE A)]:
Select this option to use the optional RC-V100 Remote Controller.
[ Standard]: Select this option to use commercially available remote controls.
NOTES NOTES
• The following controls on the remote controller will not operate the camcorder:
- CUSTOM PICT. button
- SHUTTER SELECT button
- AGC button
- AUTO KNEE button
- KNEE POINT, KNEE SLOPE dials
- BLACK GAMMA LEVEL dial
Remote cable
(supplied with the RC-V100)
mode and select [REMOTE Terminal].
- SHARPNESS LEVEL dial
- WHITE BALANCE R and B dials
- MASTER BLACK R and B dials
- MASTER PEDESTAL dial
- AUTO IRIS button
- CANCEL button
Using the Optional RC-V100 Remote Controller
To the RC-V100's
REMOTE A terminal
79