7.0 Wireless Set- - Up; Setup And Status Information (Homeowner's Router) - Carrier Infinity SYSTXCCITC-01SI Installation Instructions Manual

7.0 Wireless Set- - up

The Infinity System Control can connect to the in- - home Wi- - Fi network to
®
connect the Infinity System to the Internet. If the in- - home Wi- - Fi network is found
to be incompatible with SYSTXCCITC01- - B, an Infinity Wireless Access Point
(SYSTXXXGWR01) or any other compatible wireless router can be installed to
establish Wi- - Fi network connectivity.
Please call 1- - 800- - Carrier for support network with Wi- - Fi network set- - up and
connection to the MyInfinity Server.
The ability to remotely access and adjust the settings of the Infinity System
Control with the MyInfinity web and mobile applications is dependent on the
compatibility of the user's computer/network or mobile device, the Infinity System
Control, and/or the MyInfinity web server with, and the availability of, the user's
Internet service provider or mobile device Carrier service. Carrier Corporation
makes no representations or warranties, express or implied, including, to the
extent permitted by applicable law, any implied warranty of merchantability or
fitness for a particular purpose or use, about the compatibility of the user's
computer/network, or mobile device, with the Infinity System Control, and/or the
MyInfinity web server, with, and the availability of, the user's Internet service
provider or mobile device Carrier service, or that the ability to remotely access
and adjust the settings of the Infinity System Control will not be negatively
affected by the network- related modifications, upgrades, or similar activity of the
user's Internet service provider or mobile device Carrier service.
NOTE: See the Owner's Manual for information regarding software upgrades.

7.1 Setup and Status Information (Homeowner's Router)

To establish Wi- - Fi connectivity to the Infinity System Control using the in- - home
router or wireless access point the wireless access point SSID and
password/passkey must be known for set- - up.
80