3.2 Test Print
This product has a test print function.
The setting of the printer can be confirmed by this test
p
rint.
1. Please turn the power off and push the FEED switch.
2. Please turn the power on while holding with the FEED
switch down.
Then, the test print starts.
3. When the test print ends, the printer automatically turns
off the power supply.
4. Please turn the power off when you want to stop the test
print.
5. Please refer to the next page for a detailed description of
the test print. (The content of the test print is different
for each model)
Important
The test print fails if a printer error such as "Paper End" or "Paper
Cover Open" etc. occurs.
Please retry after resolving the error.
3 Operating Procedures
25