Table of Contents
Advertisement
PARTS, TOOLS, MATERIALS
YOU WILL NEED THE FOLLOWING TOOLS AND MATERIALS FOR THE INSTALLATION:
Carton or other heavy material for covering the counter top.
(for taping the templates to the wall)
Phillips screwdriver (for the screws)
Pencil
Flat blade screwdriver (for the toggle bolts)
Measuring tape (metal preferred)
Small side cutters or tin snips
•
If you have brick or masonry walls, you will need special hardware and tools.
•
The ductwork you need for the installation is not included. All wall and roof caps must have a back-draft
damper.(Shown on page 5.)
Clear tape
Saber saw (for cutting vent
holes for roof or wall venting)
Stud finder or thin nail.
Keyhole saw (for the power cord hole)
3/8" and 3/4" wood drill bits
1/2" and 3/16"
drill bits
— 6 —
Electric drill
Plumb line
Duct Tape
Caulking gun
Advertisement
Table of Contents
