Table of Contents
Advertisement
[Economy]
•
Press the shutter button halfway or turn the camera off and on to cancel [Sleep Mode].
•
[Sleep Mode] is set to [5MIN.] in the Intelligent Auto Mode.
•
[Sleep Mode] does not work in the following cases.
–
When using the AC adaptor
–
When connecting to a PC or a printer
–
When recording or playing back motion pictures
–
During a slide show
–
[Auto Demo]
•
The effect of the [LCD Power Save] is lower in the Digital Zoom range compared to the Optical
Zoom range.
•
The effect of the [LCD Power Save] will not affect the image being recorded.
•
Setting of [LCD Mode] has priority over the setting of [LCD Power Save] regarding the
brightness of the LCD monitor.
[Auto Review]
•
[Auto Review] is activated regardless of its setting in the following cases.
–
In [Handheld Night Shot], [Hi-Speed Burst] and [Flash Burst] in scene mode
–
When using Auto Bracket
–
During the Burst Mode
•
In Intelligent Auto Mode or [Photo Frame] in Scene Mode, the Auto Review function is fixed to
[2 sec.].
•
[Auto Review] does not work when recording motion pictures.
You can conserve the battery life by setting these menus.
Also, the battery life is conserved by dimming the LCD monitor.
[ p ] ([Sleep Mode]):
The camera is automatically turned off if the camera has not been
used for the time selected on the setting.
[
] ([2MIN.])/[
] ([LCD Power Save]):
[
ECO
Brightness of the LCD monitor is lowered. The battery life will be
conserved by lowering the image quality of the LCD monitor
further during the recording
¢ Excluding the Digital Zoom range.
[ON]/[OFF]
Set the length of time that the picture is displayed after taking the
still picture.
[
] ([1 sec.])
[
] ([2 sec.])
[
] ( [Hold]):
The pictures are displayed until [Exit] is touched.
[
] ( [Off])
- 44 -
Basic
] ([5MIN.])/[
] (
.
¢
[10MIN.])/[
] ([Off])
Advertisement
Table of Contents
