Auto Weight Programs; Auto Weight Beverage Programs - Panasonic INVERTER NN-GT46KB Operating Instructions Manual

Auto Weight Programs

With this feature food can be cooked or reheated according to the weight. The
weight has to be entered in grams.
Example
Select desired category
The microwave and auto
indicator lights, frozen indicator
also lights for frozen food auto
programs. The program number
appears in the display.
Notes
1. The Auto weight programs must be used for foods described.
2. Only cook foods within the weight ranges described on pages 32-34.
3. Always weigh the food rather than relying on the package information.
4. Most foods benefit from a standing time, after cooking with an Auto
program, to allow heat to continue conducting to the centre.
5. To allow for some variations that occur in food, check that food is
thoroughly cooked and piping hot before serving.

Auto Weight Beverage Programs

Program
3. Beverage
1 press
4. Milk
2 presses
32
EN
Weight
For reheating one beverage with a fixed weight of
200 ml or two beverages of 200 ml each from room
200 ml
temperature eg. coffee, tea or hot chocolate. Press
or
Beverage pad once, select 200 ml for 1 beverage or
400 ml
400 ml for two beverages and press Start. Stir before
and after heating.
For reheating one mug of milk with a fixed weight of
200 ml or one jug of milk with a fixed weight of 600 ml
from fridge temperature. This program is suitable for full
200 ml fat, semi-skimmed and skimmed milk. The hot milk can
or be used for making milky coffee or hot chocolate. Press
600 ml Beverage pad twice, select 200 ml for 1 mug or 600 ml
for one jug and press Start. Stir before and after heating
for one mug of milk. Stir at beeps during heating and
after heating for one jug of milk.
Enter the weight by
pressing the up and down
pads. The more pad will
start with the minimum
used weight for each
food.
Instructions
Press Start