Samsung GT-P8110 User Manual page 35

To connect to a Wi-Fi AP with a WPS PIN,
1
Open the application list and select
and networks
2
Select a network indicated as WPS available and select the
drop-down menu next to Network Setup.
3
WPS pin from access point or WPS pin from this
Select
device
→
4
On the access point, enter the PIN and press the start
button.
›
Set the static IP settings
1
Open the application list and select
and networks
2
Select an access point on the network list.
3
Select the drop-down menu next to
4
Static.
Select
5
Change the IP settings for the access point such as IP
address, Network prefix length, Gateway, DNS.
6
OK.
Select
→ Wi-Fi settings.
OK.
→ Wi-Fi settings.
Settings
Settings
Connectivity
102
→ Wireless
→ Wireless
IP settings.