Zenith A50M84WOM Operating Manual And Warranty page 5

Hook Up Direct Cable TV or Antenna
Hooking up to Direct Cable and Antenna
Locate the Antenna/Cable jack on
1
the back of your Entertainment
Machine.
Connect the cable that runs from
2
the wall or from your outdoor
antenna directly to this jack.
If you receive antenna through a
wire that is several years old and
connects with two small prongs,
you will need to purchase a 300
Ohm adapter. It should be avail-
able from your local
electronics dealer.
Hooking up to your Cable Box
Some cable services require the use of a cable box to decode
premium channels and pay-per-view. Using the programming
feature of your remote, you can connect your cable box so
that you only need your MBR Trakball remote to control all
the channels. By connecting cable directly to your
Entertainment Machine, then running it out to the cable box
and back, you make the cable box another source to choose
from in the Source menu (see page 22).
Locate the input jack on the
1
back of your cable provider's
decoder box.
Connect the cable that runs from
2
the wall to this jack.
Locate the output jack on the
3
back of your cable provider's
decoder box. Connect a cable to
this jack.
Locate the Antenna /Cable
4
jack on the back of your
Entertainment Machine. Connect
the other end of the cable that
runs from the decoder box to
this jack.
206-3359-O
I N S TA L L AT I O N
Hooking up to Direct Cable or outdoor Antenna
Cable TV
wall jack
Rf coaxial wire
(75 ohm)
ANTENNA
CABLE 1
Antenna
RF coaxial wire
(75ohm)
Hooking up to Direct Cable with a cable box
Cable TV
wall jack
Cable box
In
Out
Rf coaxial wire
(75 ohm)
G E T T I N G S TA R T E D
TV back
VARIABLE OUT
TV back
ANTENNA
CABLE 1
VARIABLE OUT
P A G E 5
Connecting
cable to your
Entertainment
Machine.