Table of Contents
Advertisement
P A G E 4 4
R E F E R E N C E
Troubleshooting, cont'd
Some quick
and easy
tips to fixing
problems
Remote control doesn't work.
yourself.
Menu options can't be
changed or selected.
No picture or sound
when any non-cable source
is selected.
Weak or no Stereo Sound
when using a stereo VCR.
The PIP inset is black or
lacks contrast.
The PIP inset is "snow" when
the source is Ant/Cable 1.
Time is incorrect.
M A I N T E N A N C E
• Make sure the batteries are fresh and installed properly.
• Try unplugging your Entertainment Machine for a few minutes,
then plug it back in.
• Check to see if the source equipment has been turned on.
• Make sure that the connections are secure on the back of your Entertainment
Machine and on the source equipment.
• Check to see if all the connections are secure.
• Look in the Audio mode menu to see if all the settings are correct.
• You are using channel 3 or 4 to view your VCR. No stereo sound is present
under that decision.
• You might want to adjust the PIP picture settings under the PIP menu.
• Check that all the wires are connected properly.
• Check to see if your input source for PIP is set correctly.
• Look to see if the TV/VCR button on your VCR has the TV selected.
• Automatic: Check to see if PBS Channel is correct and then check
Time Zone/Daylight Savings time settings under Clock menu.
• Manual: Make sure the time was set initially. Probably power was lost.
If all else fails, call 1-800-365-1690, Mon.-Fri. 7:00 am and 8:00 pm Sat. 7:00 a.m.-5:00 p.m., CST
206-3359-O
Advertisement
Table of Contents
