Setting The Light Sensitivity - Panasonic Lumix DMC-GF2 Operating Instructions Manual

[REC] Mode:

Setting the Light Sensitivity

This allows the sensitivity to light (ISO sensitivity) to be set. Setting to a higher figure
enables pictures to be taken even in dark places without the resulting pictures coming out
dark.
Press 3 (
Touch the ISO sensitivity to select.
Touch [SET].
ISO sensitivity
Recording location
(recommended)
Shutter speed
Noise
ISO sensitivity
¢
AUTO
¢
(Intelligent)
100/200/400/800/1600/3200/
6400
¢ When the [ISO LIMIT SET] of [REC] Mode menu
it is set automatically within the value set in [ISO LIMIT SET].
It is set as following when the [ISO LIMIT SET] is set to [OFF].
[When the 3D interchangeable lens (optional) is attached, it may become higher than the
following settings.]
•
When [AUTO] is selected, ISO sensitivity is adjusted automatically depending on
brightness within a maximum setting of [ISO400].
•
When setting to [
within the maximum setting of [ISO800]. ([ISO400] when the flash is used)
•
The ISO sensitivity will be set to [AUTO] (for motion pictures) when recording motion pictures.
Also, the [ISO LIMIT SET] will not operate.
Recording
).
When it is light (outdoors)
The ISO sensitivity is automatically adjusted according to the
brightness.
The ISO sensitivity is adjusted according to the movement of
the subject and the brightness.
The ISO sensitivity is fixed to various settings.
(When the [ISO INCREMENTS] in [REC] mode menu
(P135) is set to [1/3 EV], items of ISO sensitivity that can
be set will increase.)
], ISO sensitivity will adjust automatically depending on brightness
- 98 -
100
Slow
Less
Settings
(P135) is set to anything except [OFF],
6400
When it is dark
Fast
Increased