Table of Contents
Advertisement
This takes pictures of a baby with a healthy complexion. When you use the flash, the light
from it is weaker than usual.
It is possible to set different birthdays and names for [BABY1] and [BABY2]. You can
select to have these appear at the time of playback, or have them stamped on the
recorded image using [TEXT STAMP] (P153).
∫ Birthday/Name setting
1
Press 3/4 to select [AGE] or [NAME] and then press
[MENU/SET].
2
Press 3/4 to select [SET] and then press [MENU/SET].
3
Enter the birthday or name.
Birthday:
2/1: Select the items (year/month/day).
3/4: Setting.
[MENU/SET]: Exit.
Name:
For details on how to enter characters, refer to
"Entering Text" on P128.
•
When the birthday or name is set, [AGE] or [NAME] is automatically set to [ON].
•
If [ON] is selected when the birthday or name has not been registered, the setting screen
appears automatically.
4
Press 3/4 to select [EXIT] and then press [MENU/SET] to finish.
∫ To cancel [AGE] and [NAME]
Select the [OFF] setting in step
•
It can also be set with touch operation.
Note
•
During motion picture recording, settings for [PORTRAIT] are used.
•
The age and name can be printed out using the "PHOTOfunSTUDIO 6.0 HD Edition" bundled
software on the CD-ROM (supplied).
•
If [AGE] or [NAME] is set to [OFF] even when the birthday or name has been set, the age or
name will not be displayed. Before taking pictures, set [AGE] or [NAME] to [ON].
•
Intelligent ISO sensitivity control is activated, and maximum ISO sensitivity level becomes
[ISO400].
•
If the camera is turned on with [BABY1]/[BABY2] set, the age and name are displayed at the
lower left of the screen for about 5 seconds, along with the current date and time.
•
The initial setting for the AF Mode is [š].
Recording
[BABY1]/[BABY2]
2
of the "Birthday/Name setting" procedure.
- 112 -
Advertisement
Table of Contents
