Fine Tune - GoVideo T1530 User Manual

Fine Tune

•Allows you to fine tune TV reception manually. Note: The "auto fine tune"f e a t u r e
must be turned off before you can use the "fine tune" feature.
1. Press MENU.
"tv setup" then press VOL+.
2. Highlight
3. Use the CH▼/▲ buttons to highlight
4. Use the VOL+/- buttons to manually adjust fine tuning from 0-100.
5. Press MENU repeatedly to save your settings and exit.
Source
•Sets the source of incoming channels to Antenna or Cable (Standard, HRC, or IRC).
1. Press MENU.
"tv setup" then press VOL+.
2. Highlight
"source" .
3. Highlight
4. Use the VOL+/- buttons to select "antenna" , " cable STD" , " cable HRC" , or "cable
IRC" (check with your cable company for the correct setting).
5. Press MENU repeatedly to save your settings and exit.
"fine tune" .
20