Changing Channels; Fine Tuning Picture Quality - GoVideo TA2050 User Manual

Govideo ta2050: product manual
Hide thumbs Also See for TA2050:
Table of Contents

Advertisement

TA2050 UG 2-23-05.qxd
Setting Favorite Channels
You can program up to six favorite channels that you can access by pressing the F1, F2, F3, etc.
buttons on the remote control.
ΠPress the MENU button. The OSD MENU will be
displayed.
´ Select Setup using the L/M buttons and then
press the √ button.
ˇ Select Favorite Ch. using the L/M buttons and
then press the √ button.
¨ Select a favorite channel number using the L/M
buttons and then press the √ button.
ˆ Select the desired channel using the L/M
buttons.

Changing Channels

You can change channels on your LCD TV by using the TV CH+/- buttons, or by direct selection using the
number buttons. You can use the number buttons to tune to any channel (even one that has been erased or
has not been memorized).
Using the CHANNEL buttons
Press the TV CH+/- buttons to change channels.
The TV changes each channel in order, up or down, depending on which button you press. You will see all the
channels that the TV has memorized. (The TV must have memorized at least three channels.) You will not see
channels that were not memorized or have been erased.
Using the NUMBER buttons
To select single-digit channels (0~9) faster, press "0" before the single digit. For example, for channel 4, press
"0", then "4".
To select channels over 100, press the 100 button first. For example, for channel 122, press "100", then "2",
"2".
Using the LAST CH. button
Press the LAST CH. button on the remote control. The TV changes to the last channel you were watching.

Fine Tuning Picture Quality

You can fine tune a particular channel for better picture quality if noise interferes, color quality is poor, or the
screen is unstable.
ΠSelect the channel to tune using the number
(0~9) or TV CH+/- buttons.
´ Press the MENU button. The OSD MENU will be
displayed.
ˇ Select Setup using the L/M buttons and then
press the √ button.
¨ Select Fine tune using the L/M buttons and
then press the √ button.
ˆ Adjust the screen until a clear picture appears
using the L/M buttons.
2/23/05
10:05 AM
Page 13
Favorite Channel
F1
TV2
F2
TV3
F3
TV4
F4
TV5
F5
TV6
F6
TV7
Adjust
Previous
Setup
Antenna
TV
Fine tune
+ 1M
Add/Erase
Favorite CH.
LNA
Off
Auto program
Adjust
Previous
13

Advertisement

Table of Contents
loading

Related Products for GoVideo TA2050

Table of Contents