Sync Editing - Go-Video DDV9556 User Manual

Sync Editing

Sync (as in "synchronized")
Editing is useful if you only
want to copy part of a tape, or
if you want to cut commercials
while copying a TV show. The
Copy Tape button is the key to
synchronizing the playback
deck with the recording deck.
74 - '
DUAL DECK USER S GUIDE
1
Before You Begin —
• Turn off Auto Play; see page 47.
• Turn off EZ Copy; see page 38.
2
Insert Source Tape
Put the tape with your unedited source
material in Deck 1.
3
Insert Target Tape
Put your blank tape in Deck 2.
4
Position Target Tape
Play the tape in Deck 2 to the place where
you wish to begin copying, then press Still.
Tip: Leave at least 1 minute of blank tape at
the beginning of a tape to ensure a crisp edit.
5
Set Target Tape to Record/
Pause
While the target tape is in Play/Still mode,
press Record for Deck 2. This puts the deck
in Record/Pause mode.
Hi-Fi Deck
Power
Stop / Eject Pause Rewind Play F. Forward Record Deck Select
Hi-Fi Deck
Power
Stop / Eject Pause Rewind Play F. Forward Record Deck Select
MENU
/
DECK2
DECK1
Hi-Fi Deck
Copy Tape
Hi-Fi Deck
Copy Tape