Tuner & Channel List; Tuner Band - Go-Video DDV9556 User Manual

Tuner Band

Broadcast television comes
into your home from one of
two sources: over the air via
antenna, or through a cable via
a local CATV (Community
Antenna Television) provider
or Satellite. The Tuner Band
setting allows you to specify
which source you are using.
Use this setting only if Auto
Setup detected the incorrect
band, i.e. channels are coming
in on the wrong channel
numbers.
1
Open "Setup Menu"
Press and hold the Menu button for 3 seconds.
2
Select "Tuner & Channel List"
Press 3.
3
Set "Tuner Band "
Press the right arrow to select from the
following options:
• Auto — Automatically detects the Tuner
Band.
• Antenna — Specifies that you are using an
indoor or outdoor VHF/UHF antenna.
• Cable — Specifies that you are using either
Community Antenna Television (CATV, or
cable) or a Satellite receiver.
4 - Tuner & Channel List
MENU
/
DECK1 DECK2
POWER
SLOW
VCR
1 2 3
AUTO
TRK TRK
•TV
6
4 5
SHUTTLE
TV/VCR
7 8 9
MENU
/
DECK1 DECK2
4 - TUNER AND CHANNEL LIST
SETUP MENU
1 Set Clock Menu
2 : Copy/Record Settings
3 : Tuner And Channel List
4 : Dual-Deck Features
5 : Reset Factory Settings
6 : VCR Plus Setup
7 : Advanced Features
____________________________________
/ = Move = Sel MENU=Quit
TUNER AND CHANNEL LIST
CH ##
Tuner Band Auto
Auto Channel Search
Add Channel
Remove Channel
Show Weak Channels No
Tuner Audio Stereo
____________________________________
/ = Move = Sel MENU=Quit
TUNER AND CHANNEL LIST
CH ## Auto
Tuner Band Auto
Antenna
Auto Channel Search Cable
Add Channel
Remove Channel
Show Weak Channels No
Tuner Audio Stereo
____________________________________
/ = Move = Sel MENU=Quit
29