Motorola BLISS54-2 User Manual page 17

4.3.8 View camera
If you have more than one camera paired with the Parent Unit, to select the
transmission image from a specific camera, proceed as follows:
1. Press the M MENU button when the Parent Unit is in camera viewing
mode.
2. Press the < LEFT/> RIGHT button to select view camera icon
3. Press the + UP /- DOWN button to select the number of the camera that
you wish to view, or the scan icon to view each paired cameras in
sequence at about 20 seconds interval.
4. Confirm with the OK button.
4.3.9 Two-way communication
The Parent Unit has a two-way communication function. To activate two-way
communication function, hold down the
into the unit. The Speech will be heard on the camera. To deactivate two-way
communication function, release the
4.3.10 Remote Pan Scan
You can remotely Pan the camera and digitally scroll the image displayed on
the Parent Unit.
1. Press the OK button to enter scan mode
2. Press the < LEFT/> RIGHT button to pan the camera remotely.
3. Press the + UP /- DOWN button to scroll Up/Down in the image.
(The camera does not move)
4. Press the OK button to exit scan mode.
Parent Unit Menu Options
appears on the screen.
button on the Parent Unit and speak
button.
.
17