Getting Started; Power Up The Baby Unit - Motorola BLISS54-2 User Manual

2. Getting Started

2.1

Power up the Baby Unit

• Place the Baby unit near an electrical outlet in the room
where you're going to be monitoring your baby most of
the time. It should also be at least 3 feet away from your
baby.
• Plug the micro-USB plug of power adapter into the Baby
unit, connect other end to a suitable electrical outlet.
• Slide the Power
unit up to turn it on.
IMPORTANT
Only use the supplied power adapter(DC5V/1000mA).
10
switch on the side of the baby
ON
OFF
Getting Started