Nokia Phase A 6180i User Manual page 39

If you use a
You typically are required to:
*
calling card from:
MCI, AT & T True Dial 1-800 access number, then
Choice, Sprint phone number, then card num-
Canada, Unitel ber (+ PIN if required)
networkMCI, Dial 1-800 access number, then
WorldPhone MCI card number (+ PIN if required),
then phone number
GTE, PacBell, AT & T, Dial the prefix (any numbers
Stentor that must precede the phone
number) and phone number
you want to dial, then card
number, (then PIN, if required)
Note: *These calling cards are frequently used with these dialing
sequences. However, they may vary and are subject to
change at the phone company's discretion.
Note: The order of the steps to follow may vary, depending on
which dialing sequence your card uses.
Enter access number when prompted for the calling
6.
card's access number (usually the 1-800 number
listed on the back of the calling card), press OK
Note: You can also retrieve the access number from your phone
book if it has already been stored. Simply press
then scroll to find the number.
Enter card number and/or PIN when prompted to
7.
enter calling card number and personal identification
number, then press OK. Press OK again at Save
changes?
Scroll to display Card name and press Select. Enter
8.
card name using your phone's keypad, then press
OK.
Note: See "Entering text and numbers" on page 42 if you need
help on entering the card name
Choosing a calling card to use
Press Menu 4-1-3 (Settings - Call settings - Calling
1.
card)
Scroll to the desired card, then press Options
2.
34
6180i Phase A
11/6/00 2:00pm
Select this
dialing
sequence:
Access no.
+ phone no.
+ card no.
Access no.
+ card no.
+ phone no.
Prefix
+ phone no.
+ card no.
Search
,