Nokia Phase A 6180i User Manual page 108

To preset your phone to receive a data call:
AT+CSP=1
To preset your phone to receive a fax call:
AT+CSP=2
You should only have to make this modification once;
these settings typically are saved as a part of your data or
fax program's settings. Please refer to the documentation
or online help files for your data or fax application when
modifying your modem's initialization string.
When the software has sent the proper command to your
phone, the phone will display Data reception only or For
fax reception only momentarily, along with either a d or
f status indicator at the start screen.
Once your phone is preset for either data or fax reception,
you cannot receive incoming voice calls. You must either
remove the data cable or turn the phone's power off and
back on to restore normal voice call reception.
103
6180i Phase A
11/6/00 2:00pm