Getting Connected; Attaching Your Battery; Charging Your New Battery - Nokia Phase A 6180i User Manual

Table of Contents

Advertisement

2. Getting Connected

This section will help you understand the ins and outs of
charging and using your battery.

Attaching your battery

Simply place the battery
in the grooves on the
back of your phone. Then
slide the battery upward
until it clicks.
Note: Use only those
batteries approved
by the phone
manufacturer and
recharge your
battery only with the chargers approved by the
manufacturer.
See "Important Battery Information" on page 9.

Charging your new battery

Your phone can be used with either a rechargeable Li-Ion
or NiMH battery. Note that a new battery's full
performance is achieved only after two or three complete
charge and discharge cycles.
With your phone powered
on or off, connect the lead
from the charger to the
bottom of your phone.
You can also place your
phone on the charging
stand (with the stand
connected to a standard
120V AC outlet via either the ACP-7U or ACP-9U AC/DC
adaptors).
When the battery begins charging, your phone will beep
once and the battery strength indicator on the right side
of the display will begin to scroll after a few seconds.
7
6180i Phase A
11/6/00 2:00pm

Advertisement

Table of Contents
loading

Table of Contents