Table of Contents
Advertisement
USB media player
Function description
The USB media player displays still pictures and
motion pictures saved in a USB memory by inserting
the USB memory device into the display unit.
Note
●
To use this function, set [USB media player] to
[Enable] in [Setup] - [USB media player settings]. (see
page 50)
●
Using the content list delivery function of the Multi
Monitoring & Control Software (see page 63), content
(still/motion pictures) played back on a USB media
player and the playback list can be delivered.
For details, refer to the manual of Multi Monitoring &
Control Software.
●
The multi display mode is not available with USB
input.
Single Media Player
Files are played by a single unit.
Multi Media Player
Connecting more than one unit using LAN cables plays
back files in the USB memory simultaneously.
One of the multiple units becomes the parent, and the
others are children. The two-unit configuration example
is shown below.
For LAN connection, see "Network environment (Multi
Media Player only)" (see page 75).
Parent
USB
memory
Hub or broadband router
USB
memory
Child
USB
memory
Note
●
For Multi Media Player, one USB memory device is
required for one unit.
●
For Multi Media Player, the parent requires both
"scenario.dat" and "filelist.dat", and the child requires
"filelist.dat" only.
●
Describe "GroupID:G01" without changing
characters other than numbers (2-digit description
required). Without description, the Multi Media Player
does not function.
71
English
Advertisement
Table of Contents
