Table of Contents
Advertisement
Display status page
Click [Status], then [Display status] to display the Status
information page.
This page displays the Display statuses established for
the items shown below.
Displays the type of Display.
Displays the firmware version of the Display main
unit.
Network status page
Click [Status], then [Network Status] to display the
Status information page.
Displays the current configuration information of the
network.
Displays the configuration details of wired LAN.
Basic control page
To move from another page, click [Display control], then
[Basic control].
Power On/Off control
Use these to select the input signals
AUDIO mute
Switches aspect mode
66
English
Detail control page
Click [Display control], then [Advanced control] to
display the Detail control page.
Enter a command. Use the same command used for
the serial control.
Response from the unit is displayed.
Command is sent and run.
Note
●
After the settings are changed, it may take a while till
the display status is displayed.
Change Password page
Click [Change password].
Administrator
User
■
Administrator mode
Account
Current user name input field
Current password input field
New user name input field
New password input field
New password input field (re-enter for confirmation)
Button for executing password change
1
2
1
2
3
4
5
6
7
Advertisement
Table of Contents
