RocketFish RF-WHP02 User Manual page 21

Turn on your A/V receiver and play the audio source.
4
Adjust the headphone volume to your normal listening level.
5
Caution: Continuous use at high volume may permanently damage your hearing.
Notes:
• If the system is connected to an A/V receiver with an external
amplifier, turn off the amplifier to prevent sound from coming from
the amplifier speakers.
Adjusting the volume
The volume control knob on the docking station is only used to
adjust the output volume level of the audio source
AUX INPUT
headphone volume level by adjusting the knob. If the output volume
is too high, you can decrease the headphone volume level by
adjusting the knob to prevent sound distortion.
Note: After the system is set up, we recommend that you adjust the output volume
level of the audio source once.
After the docking station volume is set up, always adjust the volume
using the volume control buttons on the headphones whenever
needed.
Activating sound effects (WHP02)
Sound effect
Surround Sound
Voice Enhancement An effect that makes a weak or muffled voice clear
Off
22
level
jack. If the output volume is too low, you can increase the
CONNECT
VOL
DC IN
5 V AUX INPUT AUX OUTPUT
L R L R
Description
A virtual-surround-sound effect which makes the
sound more echoey and reverberant.
and concise as well as rejects any background noise.
(WHP01)
Volume control knob
OFF/SURROUND/VOICE
ENHANCE switch position
SURROUND
VOICE ENHANCE
OFF
connected to the