• The headphones and docking station were pre-paired at the factory.
When an active link is established between them, the POWER
indicator on the headphones and the CONNECT indicator on the
docking station glow green solidly.
Tip: In case the POWER indicator on the headphones and the CONNECT indicator
on the docking station
no active link between the headphones and docking station. Try to connect the
system manually using the CONNECT button. For more information, see
"Troubleshooting" on page 24.
Listening to the Digital Wireless Stereo Headphones
To listen to the system:
Set the headphones volume level to the minimum.
1
Turn on the headphones and docking station. Make sure that there is an
2
active link between them.
Put your headphones on your head. Adjust the angles of the left and
3
right ear pieces until you feel comfortable.
L
Power indicator
continue
to blink green after 30 seconds, it means that there is
RF-WHP01/WHP02
Connect indicator
21