Settings And Adjustments; Default Dip Switch Settings - Hoshizaki Serenity SRK-12J Service Manual

Modular crescent cuber
Table of Contents

Advertisement

C. Settings and Adjustments
Dip switches are factory set. Failure to maintain factory settings may adversely
affect performance and warranty coverage. For more information, contact Hoshizaki
Technical Support at 1-800-233-1940.

1. Default Dip Switch Settings

The dip switches are factory-adjusted to the following positions:
Dip Switch No.
1
KMS-1122MLJ
OFF OFF OFF OFF ON OFF ON OFF OFF OFF
S5 Dip Switch (Do Not Adjust)
Dip Switch No.
1
KMS-1122MLJ
OFF OFF OFF OFF ON
S4 Dip Switch
"J" Control Boards
NOTICE
S4 Dip Switch
2
3
4
5
2
3
4
5
Freeze Timer (9 & 10)
Factory Use (8)
Harvest Pump Time (Harvest Assist)/Freeze-Time Correction (7)
(Do Not Adjust)
Harvest Pump Time (Harvest Assist Duration) (6) (Do Not Adjust)
Pump-Out Frequency Control (5)
Pump-Out Time/Harvest Time During Pump-Out (3 & 4)
Harvest Timer (1 & 2)
S5 Dip Switch
"J" Control Board Only
Do Not Adjust
6
7
8
9
10
Anti-Slush (5)
Minimum Harvest Time (4)
Refill Counter (2 and 3)
Float Switch Selector (1)
38

Advertisement

Table of Contents
loading

This manual is also suitable for:

Serenity kms-1122mljSerenity srk-12j/3Serenity series

Table of Contents