Sony DVR-TRV50 Operating Instructions Manual page 41

Setting network preferences
POP Server: Enter the POP (Post Office Protocol) server address of your
provider. The POP server is for receiving email. This "POP Server" is also
referred to as a "mail server", "POP3 server", etc.
SMTP Server: Enter the SMTP (Simple Mail Transfer Protocol) server address
of your provider. The SMTP server is for sending email. This "SMTP Server"
is also referred to as a "mail server", "SMTP mail server", etc. The SMTP
server may be the same as the POP server, depending on the provider.
APOP: Select whether you want to use APOP. (APOP t "Glossary" (p. 106))
(8) Tap [Browser].
The Browser screen appears.
(9) Set up the following items:
Proxy: Enter the proxy server address of your provider.
Port: Enter the port number of the proxy server of your provider. This entry
may be unnecessary, depending on your provider. For details, consult your
provider.
(10) Tap [Exit].
The setup is completed, and the Network Setup screen appears again.
(11) Tap [Exit].
The Setup screen appears again.
DCR-TRV50 Network 3-074-603-11(1).US
41