Table of Contents
Advertisement
Audio 2.1, 4.1, 5.1 or 7.1-channel configuration
Port
Light Blue
(Rear panel)
Lime (Rear panel)
Pink (Rear panel)
Lime (Front panel)
To configure a 7.1-channel audio output:
Use a chassis with HD audio module in the front panel to support a 7.1-channel audio
output.
7.
USB 3.1 Gen 1 (up to 5Gbps) ports. These 9-pin Universal Serial Bus (USB) ports
connect to USB 3.1 Gen 1 devices.
8.
USB 3.1 Gen 2 (up to 10Gbps) ports (teal blue, Type A). These 9-pin Universal
Serial Bus 3.1 (USB 3.1) ports are for USB 3.1 Gen 2 devices.
•
USB 3.1 Gen 2 / Gen 1 devices can only be used for data storage.
•
Due to the design of the Intel
USB 2.0 and USB 3.1 Gen 2 / Gen 1 ports are controlled by the xHCI controller. Some
legacy USB devices must update their firmware for better compatibility.
•
We strongly recommend that you connect USB 3.1 Gen 2 devices to USB 3.1 Gen 2
ports for faster and better performance from your USB 3.1 Gen 2 devices.
9.
HDMI port. This port is for a High-Definition Multimedia Interface (HDMI) connector,
and is HDCP compliant allowing playback of HD DVD, Blu-ray, and other protected
content.
10.
DVI-D port. This port is for any DVI-D compatible device.
DVI-D can not be converted to output from RGB Signal to CRT and is not compatible with
DVI-I.
11.
USB 2.0 ports These 4-pin Universal Serial Bus (USB) ports are for USB 2.0/1.1
devices.
1-9
Headset
4.1-channel
2.1-channel
Line In
Rear Speaker Out Rear Speaker Out Rear Speaker Out
Line Out
Front Speaker Out Front Speaker Out Front Speaker Out
Mic In
Mic In
—
300 series chipset, all USB devices connected to the
®
5.1-channel
Bass/Center
—
—
7.1-channel
Bass/Center
Side Speaker Out
ASUS PRIME H370-A
Advertisement
Table of Contents
