Asus PRIME H370-A Manual page 12

CPU and chassis fan connectors (4-pin
CPU_FAN, 4-pin CHA_FAN1~3)
Connect the fan cables to the fan
connectors on the motherboard, ensuring
that the black wire of each cable matches
the ground pin of the connector.
Intel LGA1151 CPU socket
®
Install Intel LGA1151 CPU into this surface mount LGA1151 socket, which is
®
designed for 8th Generation Intel
processors.
DDR4 DIMM slots
Install 2 GB, 4 GB, 8 GB, and 16 GB unbuffered non-ECC DDR4 DIMMs into these
DIMM sockets.
USB 3.1 Gen 1 (up to 5Gbps) connectors (20-1 pin
U31G1_12, U31G1_56)
Connect a USB 3.1 Gen 1 module to any of these
connectors for additional USB 3.1 Gen 1 front or rear
panel ports. These connectors comply with USB 3.1
Gen 1 specifications and provide faster data transfer
speeds of up to 5 Gbps, faster charging time for USB-
chargeable devices, optimized power efficiency, and
backward compatibility with USB 2.0.
1-3
Do not forget to connect the fan cables to the fan connectors. Insufficient air
flow inside the system may damage the motherboard components. These are
not jumpers! Do not place jumper caps on the fan connectors! The CPU_FAN
connector supports a CPU fan of maximum 1A (12 W) fan power.
Core™ i7 / i5 / i3, Pentium
®
For more details, refer to Central Processing Unit (CPU).
For more details, refer to System memory.
CPU_FAN CHA_FAN3
CHA_FAN2
CHA FAN PWM
CHA FAN IN
CHA FAN PWR
, and Celeron
®
U31G1_56
USB3+5V
IntA_P2_SSRX-
IntA_P2_SSRX+
GND
IntA_P2_SSTX-
IntA_P2_SSTX+
GND
IntA_P2_D-
IntA_P2_D+
U31G1_12
CHA_FAN1
GND
®
PIN 1
USB3+5V
IntA_P1_SSRX-
IntA_P1_SSRX+
GND
IntA_P1_SSTX-
IntA_P1_SSTX+
GND
IntA_P1_D-
IntA_P1_D+
GND
PIN 1
ASUS PRIME H370-A