Toshiba AT7-C User Manual page 19

1.
2.
The Micro-USB connector of the Micro-USB cable must be correctly
plugged into the Micro-USB port on the tablet. Failure to do so correctly
may result in possible damage to the Micro-USB port.
User's Manual
When you connect the AC adaptor to the tablet, always follow the
steps in the exact order as described below. Connecting the plug to a
live electrical outlet should be the last step otherwise the USB
connector could hold an electrical charge and cause an electrical
shock or minor bodily injury when touched. As a general safety
precaution, avoid touching any metal parts.
Never place your tablet or AC adaptor on a wooden surface, furniture,
or any other surface that could be marred by exposure to heat since
the tablet base and AC adaptor's surface increase in temperature
during normal use.
Always place your tablet or AC adaptor on a flat and hard surface that
is resistant to heat damage.
Plug the USB connector of the Micro-USB cable into the AC adaptor.
Figure 3-3 Connecting the AC adaptor 1
Plug the other smaller connector of the Micro-USB cable into the
Micro-USB port on your tablet.
Figure 3-4 Connecting the AC adaptor 2
2-pin
3-pin
2
1
3-7