Table of Contents
Advertisement
Speaker Set
Use to identify the type and size of speakers in your audio setup:
1 From Stop mode, press SETUP.
2 Select Analog and press ENTER.
3 Use the
/
keys to select Speaker Set and press ENTER.
• Note that the active speakers are listed in the Speaker Set field. The default setup is LR (Left and Right) only.
4 Select each of the following speakers and use the / keys to turn them On or Off:
Subwoofer
Indicates whether or not your audio setup includes a Subwoofer (SW).
Surround
Indicates whether or not your audio setup includes Left Surround (LS) and Right Surround (RS) speakers.
Center
Indicates whether or not your audio setup includes a Center (C) speaker.
Ctr Spkr Size
Indicates the size of your center and surround speakers (if applicable). Use the / keys to select Large (for full-range speakers) or Small (for
speakers that are not capable of producing bass).
5 Select OK and press ENTER.
6 Press SETUP or RETURN
to exit the Setup menu.
47
Advertisement
Table of Contents
Troubleshooting
