Dvd Operations; Basic Disc Playback; Playing A Dvd, Cd, Or Vcd - GoVideo D2730 User Manual

Networked dvd player

Hide thumbs Also See for D2730:

Table of Contents

Chapter 4

Before you begin:

• Turn on the DVD player using the front panel POWER button. If the unit is in Standby mode, press STANDBY/ON on the remote control

to power on the unit. The blue LED will light behind the front panel arrow keys.

• Turn on your TV, and set it to the audio/video input connected to the DVD player.

• Turn on your audio system (if using an external amplifier/audio system), and set it to the input connected to the DVD player.

1 Press OPEN/CLOSE

on the remote control or front panel to open the disc drawer.

2 Place the disc in the drawer with the label side facing up and playback side facing down. If the disc has two sides, place the disc with the

desired playback side facing down.

3 Press OPEN/CLOSE

again to close the disc drawer.

4 Press PLAY

on the remote control or front panel.

• Many discs will load and begin playing automatically when the disc drawer closes.

• If the DVD has a disc menu, or more than one title, the disc menu may appear; see Disc Menu Navigation on page page 32.

• Adjust the playback volume by pressing the VOL

• Do not push the disc tray when closing it. Always press OPEN/CLOSE

• If the disc is scratched, dirty, or not encoded for Region 1, you will receive an error message and the disc will not play.

• Always press STOP

to stop playback of a disc before powering off the player.

DVD Operations

keys on the remote control.

to close the disc tray.

Table of Contents