Part Identification Chart - NordicTrack FS10i User Manual

PART IDENTIFICATION CHART

Use the drawings below to identify the small parts needed for assembly. The number in parentheses below each
drawing is the key number of the part, from the PART LIST near the end of this manual. The number following the
key number is the quantity needed for assembly. Note: If a part is not in the hardware kit, check to see if it
has been preassembled. Extra parts may be included.
M10 Locknut
(133)–2
M10 x 18mm
Washer (138)–4
M6 x 20mm M8 x 14mm
Screw Shoulder Screw
(118)–6
M10 x 45mm Bolt
(119)–4
M10 x 70mm Bolt (130)–2
Axle Washer
(31)–2
M10 x 25mm Screw
(122)–2
M10 x 45mm Screw
7
M4 x 10mm M4 x 16mm
Screw
(148)–2 (143)–22
(123)–8
(124)–4
Screw