Brushroll - Hoover WindTunnel 2 Whole House Rewind Owner's Manual

BRUSHROLL

: How to Clean
CAUTION
!
To reduce the risk of injury from moving parts - Unplug
before servicing.
Brushroll -
Bottom plate with screws
Place handle in the low position and turn the cleaner over so
the bottom side is up.
4.17 Remove the 6 screws as shown with a Phillips
screwdriver.
4.18 Pivot off bottom plate.
4.19 Remove any debris and/or hair from brushroll.
Replace the bottom plate aligning the screw holes and
install the 6 screws as shown.
4.17
!
4.19
11
Actual model may vary from images shown.
4.18