Glyph GT10303-1000 Quick Manual page 20

4. Enter
5 to change the current fixed disk drive.
MS-DOS displays the connected disk drives.
5. Enter the number of the disk that has no corresponding drive
letter (in the example below, that's Drive 2).
You are invited to make a choice (same list as in Step 3).
6. Enter 1 to create a primary DOS partition.
Your computer verifies the drive's integrity, after which you are
asked to choose whether you want to use all the space available.
Preparing Your Drive for Use: Windows Users
18
Quick Guide #610014-1.03
www.glyphtech.com – © Glyph Technologies
GT 103