Installation Requirements; Tools And Parts - KitchenAid KDTM404KPS0 Owner's Manual

INSTALLATION REQUIREMENTS

TOOLS AND PARTS

Gather the recommended tools and parts before starting
installation. Read and follow the instructions provided with
the tools listed here.
All Installations
Tools Needed:
Pliers
Phillips screwdriver
5/16" (7.9 mm) and
1/4" (6.4 mm) nut drivers or hex
sockets
Measuring tape or ruler
10" adjustable wrench that
opens to 1 / " (29 mm)
1
8
†TORX, T15, and T20 are trademarks of Acument Intellectual Properties, LLC.
8
Flat-blade screwdriver
Utility knife
Small level
5/8" (15.9 mm) open-end
wrench
Torx T20 and, if installing
†
custom front panels, Torx T15
screwdrivers
Other Useful Items You May Need:
Flashlight
Bath towel
Parts Supplied:
Drain hose clamps (2)
(1 large/red and 1 small/silver)
#8 x 1/2" (12.7 mm) Phillips-head
screws (2)
Make sure all parts are included in the literature package.
Door handle (on some models)
Shallow pan
Masking, or duct tape
Drain hose
Undercounter mounting
brackets (2)