Table of Contents
Advertisement
Specifications
The specifications of the projector are as follows.
Power supply
Power consumption
Power consumption (during
standby)
Size
DLP chip
Display system
Number of pixels 2 304 000 pixels (1 920 x 1 200 dots)
Lens
Light source
Light output
Center to corner zone ratio
*1
Contrast ratio
*1
Color system
Projected image size
Image aspect ratio
Projection method
Power cord length
Outer case
Outer color
Width
Dimensions
Height
Depth
Weight
Noise level
*1
Laser Class
Laser
Classification
Risk Group
Operating
environment
temperature
Operating
environment
Operating
environment
humidity
Power supply
Operating range
Remote
control
Weight
Dimensions
*1 Measurement, measuring conditions, and method of notation all comply with ISO/IEC 21118:2020 international standards.
*2 Average value. Weight varies for each product.
*3 The operating environment temperature should be between 0 °C (32 °F) and 40 °C (104 °F) if the projector is used at an altitude between 1 400 m
(4 593') and 4 200 m (13 780') above sea level. When the [PROJECTOR SETUP] menu → [OPERATION SETTING] → [OPERATING MODE] is set
to [ECO], [QUIET], [LONG LIFE1], [LONG LIFE2], or [LONG LIFE3], the projector cannot be used at an altitude of 2 700 m (8 858') or higher above
sea level.
When using the projector at an altitude lower than 2 700 m (8 858') above sea level, and the operating environment temperature becomes 30 °C
(86 °F) or higher, the light output may be reduced to protect the projector. When using the projector at an altitude between 2 700 m (8 858') and
4 200 m (13 780'), and the operating environment temperature becomes 25 °C (77 °F) or higher, the light output may be reduced to protect the
projector.
Note
f The model numbers of accessories and optional accessories are subject to change without prior notice.
Chapter 7 Appendix — Specifications
100 V - 240 V ~ (100 V - 240 V alternating current), 50 Hz/60 Hz
465 W (5.0 A - 2.0 A)
When [STANDBY MODE] is set to [ECO]: approx. 0.5 W
When [STANDBY MODE] is set to [NORMAL], [IN STANDBY MODE] in [AUDIO SETTING] is set to [OFF],
[QUICK STARTUP] is set to [OFF], and <DC OUT> terminal supplies power (2 A): approx. 25 W
When [STANDBY MODE] is set to [NORMAL], [IN STANDBY MODE] in [AUDIO SETTING] is set to [ON],
[QUICK STARTUP] is set to [OFF], and <DC OUT> terminal supplies power (2 A): approx. 35 W
When [STANDBY MODE] is set to [NORMAL], [IN STANDBY MODE] in [AUDIO SETTING] is set to [ON],
[QUICK STARTUP] is set to [ON], and <DC OUT> terminal supplies power (2 A): approx. 65 W
17 mm (0.67") (aspect ratio 16:10)
DLP chip x 1, DLP projection system
Fixed: 0.8:1
Electric focus: F = 1.75, f = 11.9 mm
Laser diode
5 000 lm
(when [PICTURE MODE] is set to [DYNAMIC], [DAYLIGHT VIEW] is set to [OFF], [DYNAMIC CONTRAST]
is set to [OFF], [LIGHT OUTPUT] is set to [100%] and [AUTO POWER SAVE] is set to [OFF])
85%
20 000:1 (when [PICTURE MODE] is set to [DYNAMIC], [OPERATING MODE] is set to [NORMAL] and
[DYNAMIC CONTRAST] is set to [1])
7 standards (NTSC/NTSC4.43/PAL/PAL-N/PAL-M/SECAM/PAL60)
1.02 m (40") to 7.62 m (300")
16:10
[FRONT/REAR]/[FLOOR/CEILING]
3.0 m (118-1/8")
Molded plastic
Black
498 mm (19-5/8")
168 mm (6-5/8") (with the feet at shortest position)
481 mm (18-15/16") (including lens)
Approx. 16.4 k ] (36.2 lbs.)
*2
32 dB (When [OPERATING MODE] is set to [NORMAL])
27 dB (When [OPERATING MODE] is set to [QUIET])
Class 1 (IEC/EN 60825-1:2014)
Risk Group 2 (IEC 62471-5:2015)
0 °C (32 °F) to 45 °C (113 °F)
*3
10 % to 80 % (no condensation)
DC 3 V (AAA/R03/LR03 battery x 2)
Within approx. 30 m (98'5") (when operated directly in front of signal receiver)
102 ] (3.6 ozs.) (including batteries)
Width: 48 mm (1-29/32"), Height: 145 mm (5-23/32"), Depth: 27 mm (1-1/16")
ENGLISH - 185
Advertisement
Table of Contents
