Button - MSI P55A Fuzion Series Manual

Button

The mainboard provides the following buttons for you to set the computer's function.
This section will explain how to change your mainboard's function through the use of
button.
Power Button: POWER1
This button is used to turn-on or turn-off the system. Press the button to turn-on or
turn-off the system.
Reset Button: RESET1
This button is used to reset the system. Press the button to reset the system.
OC Genie Button: OC Genie
This button is used to auto-overclock for the system. Press this button to enable the
OC Genie function when the system is in power off state, meanwhile, the button will
light and lock. And then the system will automatically detect the optimum values to
overclock after booting the system. To disable the OC Genie function, please press the
button again after power off the system, meanwhile, the button light will off and unlock,
and the system will restore the default for next boot.
Important
Please install the DDR3 1333 and up memory and equip better heat sink/ cooler with
•
OC Genie function.
We do not guarantee the OC Genie overclocking range and the damages or risks
•
caused by the OC Genie overclocking behavior.
• You can disable the OC Genie function in BIOS setup. And we suggest you to save
the OC Genie configuration to overclocking profile in BIOS for future using.
• The usage of OC Genie is at your own risk. Overclocking is never guaranteed by
MSI.
MS-7688 MS-7688
2-19