Advertisement
Technical data
Dimensions (DxWxH)
Weight
Max. capacity
Condensate container
Connection voltage
Connected load
Fuse protection
Ambient temperature
Product number/
Production number
You can find the rating plate on the back of the dryer.
Power consumption when switched off
Power consumption when ready for use (left-on mode)
Drum interior light (depending on model) (bulb E14, 25 W): The drum lights up after the door is opened or closed,
and after the programme starts, and switches off automatically. Changing the bulb
Consumption values table
Spin speed which
Programme
is used for spinning
the laundry
Cottons
Cupboard Dry*
1400 rpm
1000 rpm
800 rpm
Iron Dry*
1400 rpm
1000 rpm
800 rpm
Easy-Care
Cupboard Dry*
800 rpm
600 rpm
*
Programme setting for testing in accordance with the applicable EN61121 standard.
** The values may differ from those specified, depending on the type of fabric, composition of laundry to be dried, residual moisture in the fabric
and the amount of laundry being loaded.
Most efficient programme for cotton fabrics
The following "standard cottons programme" (identified with
its combined energy consumption for drying wet cotton laundry.
Standard programme for cottons in accordance with current EU regulation 932/2012
Programme
Load
Cottons Cupboard Dry
7 kg/3.5 kg
Programme setting for testing and energy labelling in accordance with Directive 2010/30/EU.
Optional accessories
(from after-sales service using order number, depending on model)
WMZ
Platform
For easier loading and unloading. The basket contained in the drawer can be used to carry the laundry.
20500
Washer-dryer stack connection set
WTZ
The dryer can be placed on top of a suitable washing machine with the same width and depth to save space.
11310
The dryer must be fastened to the washing machine using this connection set.
With pull-out worktop: WTZ 11300
Connection fittings for condensation outlet
WTZ
The condensation is conveyed directly via a hose.
1110
WTZ
Installation underneath the worktop
Instead of the appliance covering plate, you must have a metal cover fitted by a specialist.
10290
60 x 60 x 85 cm (height adjustable)
approximately 45 kg
7 kg
4.2 l
see appliance rating plate
0.10 W
1.00 W
page 10.
Duration**
Energy consumption**
7 kg
3.5 kg
7 kg
106 min
65 min
3.60 kWh
124 min
76 min
4.20 kWh
143 min
88 min
4.80 kWh
82 min
50 min
2.59 kWh
98 min
60 min
3.28 kWh
112 min
69 min
3.96 kWh
3.5 kg
3.5 kg
42 min
1.35 kWh
51 min
1.65 kWh
) is suitable for drying normal, wet cotton laundry and is most efficient in terms of
Energy consumption
Programme duration
4.20 kWh/2.30 kWh
124 min/76min
What to do if ...
If you cannot rectify a fault yourself (e.g. switching off/on), please contact our after-sales service. We will
always find an appropriate solution and will avoid unnecessary visits by engineers. Trust the expertise of
the manufacturer and rest assured that the repair will be carried out by trained service technicians using
original spare parts. The contact details of your local after-sales service can be found in the enclosed after-
sales service directory, or by calling one of these numbers:
– GB 0344 892 8979 (Calls charged at local or mobile rate.)
– IE 01450 2655 (0.03 € per minute at peak. Off peak 0.0088 € per minute.)
When contacting the after-sales service, please quote the appliance's product number (E no.) and
production number (FD) (see the inside of the door).
Set the programme selector to Off and remove the appliance plug from the socket.
The
Start/Stop indicator lamp
does not light up.
The display panel light and indicator
lights (depending on model) go out
and the
Start/Stop indicator light
flashes.
The Container and
indicator lights are flashing.
The Filter and
Start/Stop
indicator lights are flashing.
Dryer does not start.
3.5 kg
1.97 kWh
Water is running out.
2.30 kWh
2.63 kWh
The door opens by itself.
1.42 kWh
1.80 kWh
Creasing.
2.17 kWh
Laundry is not dried correctly or is
still too damp.
Drying time too long.
The humidity in the room increases
significantly.
Power failure.
One or more indicator lights for
programme status are flashing.
The interior light is not working
(depending on model).
9
Mains plug plugged in?
Programme selected?
Check the socket fuse.
Energy-saving mode is activated
mode instructions.
Start/Stop
Empty the condensate container.
If featured, check hose for condensation outlet.
Clean the fluff filter and/or air cooler under running water
Page 4/6.
Start/Stop button selected?
Door closed?
Programme set?
Ambient temperature greater than 5 °C?
Align dryer horizontally.
Clean air cooler seal.
Push the door closed until you hear it engage.
Laundry load exceeded?
Remove articles of clothing immediately after
the end of the programme, hang up and pull into shape.
Unsuitable programme selected
After the end of the programme, warm laundry feels damper than it
actually is. Spread the laundry out and allow the heat to disperse.
Finely adjust the dryness level – this extends the drying time but
does not increase the temperature. Your laundry will become drier.
Select a programme with a longer drying time or increase the drying
level. This does not increase the temperature.
Select a time programme for extended drying of laundry that is still
damp.
If you have exceeded the maximum load for the programme, the
laundry may not be dried correctly.
Clean the moisture sensor in the drum. A fine layer of limescale may
adversely affect the performance of the sensors and your washing
will not dry properly.
Drying has been interrupted as a result of a power cut, because the
condensate container is full or because the maximum drying time has
been exceeded.
Rinse the fluff filters under running water
Insufficient supply of air
ensure that air can circulate.
Air inlet possibly blocked
Clear inlet
Ambient temperature higher than 35 °C
Make sure the room is sufficiently ventilated.
Remove laundry from the dryer immediately and spread out. This
allows the heat to dissipate. Be careful as the door, the drum and the
laundry may be hot.
Clean filter and air cooler
Page 4/6.
Check installation conditions
Switch off, leave to cool down, switch on again, restart programme.
Pull out the appliance plug, remove the cover cap in the interior above
the door (use Torx 20 screw driver) and replace the bulb. Close the
cover cap. Never operate the dryer without a cover cap.
see the separate Energy-saving
Page 7.
Page 4.
Page 8.
ventilate the room.
Page 8.
10
Advertisement
