Dukane ImagePro 6430 User Manual page 71

User Controls
When you used the

projector IP address,
you can not link to
your service server.
PJLink: Set a

password for PJLink.
PJLink is a
standardization
of protocol used
for controlling
projectors of different
manufacturers. This
standard protocol is
established by Japan
Business Machine and
Information System
Industries Association
(JBMIA) in 2005.
The projector supports
all the commands of
PJLink Class 1.
AMX BEACON:

Turn on or off for
detection from AMX
Device Discovery
when connecting
to the network
supported by AMX's
NetLinx control
system.
CRESTRON ROOM-

VIEW compatibility:
The projector
supports CRESTRON
ROOMVIEW,
allowing multiple
devices connected
in the network to
be managed and
controlled from
a computer or a
controller.
For more information,
visit http://www.
crestron.com
English ... 64
How to use web browser to control your projector
1. Turn on DHCP to allow the DHCP server to automatically assign
an IP, or manually enter the required network information.
SECURITY KEYWORD
2. Then choose apply and press ENTER button to complete the
configuration process.
3. Open your web browser and type in from the OSD LAN screen
then the web page will display as below:
ENTER CURRENT SECURITY CODE
INVALID-KEYWORD TOO SHORT
ENTER EXIT
NETWORK
NETWORK STATUS DISCONNECT
DHCP OFF
IP ADDRESS
SUBNET MASK
GATEWAY
APPLY