Dukane ImagePro 6430 User Manual page 29

Introduction
 For the Schedule
function of the PC
Control utility Pro 4 to
work, you must have
your computer run-
ning and not in stand-
by/sleep mode. Select
"Power Options" from
the "Control Panel" in
Windows and disable
its standby/sleep
mode before running
the scheduler.
[Example] For Win-
dows 7:
Select "Control
Panel" -> "System and
Security" -> "Power
Options" -> "Change
when the computer
sleeps" -> "Put the
computer to sleep" ->
"Never".
 When "NORMAL"
is selected for
"STANDBY MODE"
from the menu, the
projector cannot
be controlled via
the serial cable or
network (wired LAN)
connection.
 The projector
does not support the
LAN automatic search
feature of PC Control
Utility Pro 4. To con-
nect the projector,
register an IP address
manually.
English ... 22
Read "END USER LICENSE AGREEMENT" carefully.
4 If you agree, click "I accept the terms in the license agreement" and then
click "Next".
Follow the instructions on the installer screens to complete the
installation.
TIP:Uninstalling PC Control Utility Pro 4
• To uninstall PC Control Utility Pro 4, do the same procedures stated as in
"Uninstalling Virtual Remote Tool". Read "Virtual Remote Tool" as "PC
Control Utility Pro 4"
Step 2: Connect the projector to a LAN
Connect the projector to the LAN by following the instructions in
"Connecting the Projector" on pages 25-26 and "How to use web
browser to control your projector" in pages 64-65.
Step 3: Start PC Control Utility Pro 4
Click "Start" -> "All programs" or "Programs" -> "NEC Projector
User Supportware" -> "PC Control Utility Pro 4" -> "PC Control
Utility Pro 4".
TIP: Viewing the Help of PC Control Utility Pro 4
• Displaying the Help file of PC Control Utility Pro 4 while it is running.
Click "Help (H)" -> "Help (H)" of window of PC Control Utility Pro 4 in
this order.
The pop-up menu will be displayed.
• Displaying the help file using the Start Menu.
Click "Start" -> "All programs" or "Programs" -> "NEC Projector User
Supportware" -> "PC Control Utility Pro 4" -> "PC Control Utility Pro 4
Help".
The Help screen will be displayed.
PC Control Utility Pro 5 for Mac OS
Step 1: Install PC Control Utility Pro 5 on the computer
1 Connect your computer to the Internet and visit our website (http://www.
nec-display.com/dl/en/index.html).
2 Download the updated PC Control Utility Pro 5 from our website.
3 In Finder, control-click ("control" + click) or right click the PC Control
Utility Pro 5.pkg.
4 Select "Open" from the top of contextual menu that appears.