Electrolux EIFLS20QSW Installation Instructions Manual page 7

Releasing Drain Hose
Removing shipping hardware
Installing hole plugs
Locate hole plugs in the small bag supplied with wash-
er instruction guides. Cut them apart from each other
and insert them in the holes in washer back panel.
Installation Instructions
x 2
x 3
x 3
The drain hose is secured in place with two plastic
latching clamps. Press the locking tab and release
the drain hose.
Remove all of the following from the back of the washer:
• 3 shipping bolts
• 2 plastic clamps
• 3 shipping spacers
NOTE
Rubber expansion material on spacers may need time to
relax before they can be easily pulled through shipping hole.
IMPORTANT
Save all shipping bolts and spacers for future use. If the washer
is to be transported at a later date, the shipping hardware must
be reinstalled to help prevent shipping damage.
7