Installation
While the POWER
indicator is blinking
green in short cycles,
the power cannot be
turned off by using
the power button.
English ...
22
Powering Off the Projector
1. Press the "POWER
button on the control panel to turn off the projector lamp,
you will see a message as below on the on-screen display.
2.
Press the "POWER OFF" button again to confirm.
3. Disconnect the power cord from the electrical outlet and the
projector. If you disconnect the power cord while viewing
the picture and connect the power cord again, wait for at
least one second until you connect the power cord again.
OFF"
button on the remote control or the
POWER OFF
ARE YOU SURE?
YES
NO