Restricting Calls; Using Special Numbers; Erasing The Contacts Directory; Erasing All My Content - Sanyo SCP-85H Operating Manual

Table of Contents

Advertisement

Restricting Calls

You can restrict both incoming calls and outgoing calls if necessary. (The Restrict Calls setting
does not apply to 911).
To restrict calls:
1.
Select MENU/OK > Settings > More... > Restrict and Lock, and then enter your lock
code. (The Restrict and Lock menu is displayed.)
2.
Select Voice > Restrict.
3.
Select Limit Use.
4.
Select the menu under Incoming Calls or Outgoing Calls and press MENU/OK.
5.
Select your desired option and press MENU/OK.
Options:
Allow All: You can make or receive all calls.
Phone Book Only: Only Contacts entries, Voicemail, or special numbers are available to
make or receive calls.
Special #s Only: Only three special numbers' entries are available to make or receive
calls.
Note: Restricted incoming calls are forwarded to voicemail.

Using Special Numbers

You can save up to three special numbers in addition to your Contacts list entries (the same
number may be in both directories). You can make and receive calls to or from special numbers
even when your phone is in Lock Phone status.
To add or replace a special number:
1.
From the Security Menu display (See "Accessing the Security Menu" on page 27), select
Special Numbers.
2.
Select a field for your entry and press MENU/OK.
3.
Enter your desired phone number and press MENU/OK.

Erasing the Contacts Directory

To erase all the names and phone numbers in your Contacts Directory:
1.
From the Security Menu display (See "Accessing the Security Menu" on page 27), select
Erase/Reset > Erase PhoneBook.
2.
If you're sure you want to erase your Contacts, select OK (left softkey), and then select
Yes.

Erasing All My Content

To erase all the downloaded data from web:
1.
From the Security Menu display (See "Accessing the Security Menu" on page 27), select
Erase/Reset > Erase My Content.
2.
If you're sure you want to erase downloaded data from web, select OK (left softkey), and
then select Yes.
If you have assigned downloaded data, the function returns to its default setting.
29

Advertisement

Table of Contents
loading

This manual is also suitable for:

Scp-8500

Table of Contents