Table of Contents
Advertisement
This is the Internet version of the user's guide. © Print only for private use.
Time & date
Adjusting the time and date here sets these throughout your
P910i.
The dialog has three tabs. You can set:
Time & date
The current time and date. Here you can also turn
Summertime (daylight saving time) on or off for your
location.
Format
Specify how you want the time and date to be displayed
on the screen.
Workdays
Specify the days in your working week.
Note These settings are also available in the
application.
Time & date tab
To set the current date
1. On the
tab, select the date. A calendar view opens.
Time & date
Tap the arrows to set the current year and month.
2. Select the current date.
To set the current time
1. On the
tab, select the time. Select the upper half of
Time & date
the hour or minute box to increase the number displayed, or
the lower half to decrease the number.
150
Control panel
2. Select the
This is only possible if you use the 12-hour time format.
3. Confirm by tapping outside the time picker.
If the locations you have set under
International
summertime (daylight saving time), you can adjust the time and
date.
To turn daylight saving time on
1. On the
boxes for the zones that currently have daylight saving time.
2. Select
Time
Format tab
You can specify how you want the time and date to be displayed
on the screen, and if you want to use the 12-hour (am/pm) or 24-
hour time format.
To set the time and date display format
1. Select
2. Select
3. Select a
4. Select
5. Select
/
box.
am
pm
Control panel >
are in a country/region that currently has
tab, select
Time &date
Summertime,
.
Done
and choose a format.
Date format
and choose a separator.
Date separator
.
Time format
choose a separator.
Time separator
.
Done
select the check
Advertisement
Table of Contents
