Brother RuggetJet RJ4030 User Manual page 18

Chapter 1
b
Choose [Yes, I have a USB cable to
use for installation], and then click
[Next].
Note
If the [Important Notice] screen appears,
read the notice. Check the box after you
confirm the SSID and Network Key, and
then click [Next].
c
Temporarily connect the USB cable
(optional) directly to the computer and
the printer.
14
d
Do one of the following:
 If the Installation confirmation screen
appears, check the box and click
[Next], then go to e.
 Otherwise, go to f.
e
Check [Yes] if you want to connect with
the listed SSID. Click [Next] and go to
h.
f
The wizard will search for wireless
networks available from your printer.
Choose the SSID that you noted in
MEMO uu page 11 and then click
[Next].
Note
• If the list is blank, check that the access
point is turned on and is broadcasting the
SSID, and then see if the printer and the
access point are within range for wireless
communication.
Then, click [Refresh].