Gigabyte GA-946GM-DS2 User Manual page 37

USB 2.0 Controller
Disable this function if you are not using onboard USB 2.0 feature.
Enabled
Disabled
USB Keyboard Support
Enabled
Disabled
USB Mouse Support
Enabled
Disabled
Legacy USB storage detect
This option allows users to decide whether to detect USB storage devices, including USB flash
drives and USB hard drives during POST.
Enabled
Disabled
Azalia Codec
Auto
Disabled
Onboard H/W LAN
Enabled
Disabled
SMART LAN (LAN Cable Diagnostic Function)
CMOS Setup Utility-Copyright (C) 1984-2006 Award Software
Start detecting at Port.....
Pair1-2 Status = Open
Pair3-6 Status = Open
Pair4-5 Status = Open
Pair7-8 Status = Open
: Move Enter: Select
F5: Previous Values
This motherboard incorporates cable diagnostic feature designed to detect the status of the attached LAN
cable. This feature will detect cabling issue and report the approximate distance to the fault or short.
Refer to the following information for diagnosing your LAN cable:
When No LAN Cable Is Attached...
If no LAN cable is attached to the motherboard, the Status fields of all four pairs of wires will show
Open and the Length fields show 0.0m, as shown in the figure above.
Enable USB 2.0 Controller. (Default value)
Disable USB 2.0 Controller.
Enable USB Keyboard Support.
Disable USB Keyboard Support. (Default value)
Enable USB Mouse Support.
Disable USB Mouse Support. (Default value)
BIOS will scan all USB storage devices. (Default value)
Disable this function.
Auto detect Azalia audio function. (Default value)
Disable Azalia audio function.
Enable Onboard H/W LAN function. (Default value)
Disable this function.
SMART LAN
/ Length = 0.0m
/ Length = 0.0m
/ Length = 0.0m
/ Length = 0.0m
+/-/PU/PD: Value F10: Save
F6: Fail-Safe Defaults
- 37 -
Item Help
Menu Level
ESC: Exit F1: General Help
F7: Optimized Defaults
BIOS Setup