Gigabyte GA-8VT800 User Manual page 73

Flash Type/Size................SST 49LF002A
[Enter] to continue updating BIOS or "ESC" to abort.
Enter: Run
3. Press Y button if you make sure to update BIOS.
Then it will begin to update BIOS. The progress of updating will be shown at the same time.
Flash Type/Size................SST 49LF002A
The porcess of
Do not Turn Off Power On RESET System
updating BIOS
Enter: Run
4. Press any keys to return to the Q-Flash
Flash Type/Size................SST 49LF002A
Enter: Run
5. Press Esc and then Enter to exit the Q-Flash
Flash Type/Size................SST 49LF002A
Enter: Run
6. Press Del to enter BIOS menu after system reboots and load BIOS Fail-Safe Defaults. See
how to load BIOS Fail-Safe Defaults, please kindly refer to Step 6 to 7 in Part One.
Congratulation!! You have updated BIOS successfully!!
Q-Flash Utility V1.30
CHECKSUM = AC03 Keep DMI DataEnable
Are you sure to update BIOS? Update BIOS from Floppy
Save BIOS to Floppy
h/i: Move
ESC: Reset F10:Power Off
Q-Flash Utility V1.30
Updating BIOS Now...
Keep DMI DataEnable
>>>>>>>>>>>>>.................
Update BIOS from Floppy
Save BIOS to Floppy
h/i: Move
ESC: Reset F10:Power Off
™ menu when the BIOS updating procedure is completed.
Q-Flash Utility V1.30
Keep DMI DataEnable
!! Copy BIOS completed - pass !!
Update BIOS from Floppy
Please press any key to continue....
Save BIOS to Floppy
h/i: Move
ESC: Reset F10:Power Off
™
utility. System will restart.
Q-Flash Utility V1.30
Keep DMI DataEnable
Are you sure to RESET? Update BIOS from Floppy
Save BIOS to Floppy
[Enter] to continue or [Esc] to abort....
h/i: Move
ESC: Reset F10:Power Off
- 69 -
256K
You can press "Enter" to
continue updating BIOS
or "ESC" to abort.
256K
Do not turning off power or
reset your system at this
stage!!
256K
256K
Technical Reference