Onboard Parallel Port; Parallel Port Mode; Epp Mode Select - Gigabyte GA-8STML User Manual

C Serial Port B Mode
(This item allows you to select the IR modes if the serial port B is used as an IR port.Set at Normal , if
you use COM2 as the serial port as the serial port, instead as an IR port.)
Set onboard I/O chip UART to ASKIR Mode.
8ASKIR
Set onboard I/O chip UART to IrDa Mode.
8IrDA
Set onboard I/O chip UART to Normal Mode. (Default Value)
8Normal
C OnBoard Parallel port
This feature allows you to select from a given set of parameters if the parallel port uses the onboard I/
O controller.
Enable On Board LPT port and using address 378, IRQ7.(Default Value)
8378/IRQ7
Enable On Board LPT port and using address 278, IRQ5.
8278/IRQ5
Enable On Board LPT port and using address 3BC, IRQ7.
83BC/IRQ7
Disable onboard Parallel port.
8Disabled
C Parallel Port Mode
This feature allows you to connect with an advanced print via the port mode it supports.
Using Parallel port as Standard Parallel Port.
8SPP
Using Parallel port as Enhanced Parallel Port.
8EPP
Using Parallel port as Ex tended Capabilities Port.(Default Value)
8ECP
Using Parallel port as ECP & EPP mode.
8ECP+EPP
C EPP Mode Select
This feature allows you to select the EPP type version.
8EPP 1.9 Compliant w ith EPP 1.9 v ersion.
8EPP 1.7 Compliant w ith EPP 1.7 v ersion.(Default Value)
C ECP Mode Use DMA
This feature allows you to select Direct Memory Access(DMA) channel if the ECP mode selected.
Set Parallel Port DMA to 3.(Default Value)
83
Set Parallel Port DMA to 1.
81
C Game Port Address
This feature allows you to select the game port address or disable it.
- 33 - BIOS Setup