Check Blower Motor Orientation - GE JVM6172SKSS Installation Instructions Manual

C3. CHECK BLOWER MOTOR
ORIENTATION
The blower fan blade opening should be facing
1
the front of the microwave. If the fan opening is
already facing the front of the microwave, skip to
Step C5. Otherwise, continue to Step C4 to adjust
the blower orientation.
C4. ADAPTING MICROWAVE BLOWER
FOR RECIRCULATION
1 Remove and save screws
to microwave oven.
Back of
Microwave
Oven
2 Open the blower door by lifting it up at the back of
the microwave oven.
3 Carefully pull out the blower unit. The wires
will extend far enough to allow you to adjust the
blower unit.
Installation Instructions
that holds blower motor
Blower Motor
Retaining
Screws
4 Roll the blower unit 90° so that fan blade openings
are facing toward the front of the microwave.
BEFORE: Fan Blade
Openings Facing Up
AFTER: Fan Blade
Openings Facing
Forward
NOTE: Make sure wires remain routed in the grooves of
the motor frame.
5 Place the blower unit back into the opening.
CAUTION
unit wiring. Make sure the wires are not pinched.
21
Roll
Do not pull or stretch the blower